Wi-Fi Expert

Why you need wi-fi expert?

Wi-Fi does not work and freezes

Usually, the cause is your neighbor's Wi-Fi access points, which work on the same channel

Unstable and slow Internet connection

It's not your ISP's fault, your Wi-Fi access point is the bottleneck

The network speed drops drastically when everyone at home connects to Wi-Fi

This is a common issue with home routers, which aren't designed for heavy loads

Wi-Fi works fine in only one room

Overall coverage is greatly affected by walls, especially those made of reinforced concrete

You have to reboot your Wi-Fi access point from time to time

Most likely you have the cheapest or even free network device supplied by your ISP

What we can do for you

Consider a large apartment as an example

The total area is 180 sq.m. Seamless high-performance Wi-Fi throughout the apartment.

Problem

Good Internet connection in the hall and kitchen, but the signal is worse in the bedrooms. Performance decreases significantly as soon as more than two devices are online.

Solution

We examined the network setup and found weaknesses in it. We decided to use two access points to cover 180 sq.m. of the apartment area. And now we have the same speed anywhere in the apartment, no matter how many devices are connected.

Consider a large house as an example

3-storey house. Seamless high-performance Wi-Fi throughout the house, balcony, and barbecue area.

Problem

Wi-Fi is good on the first floor only. On the second floor, the connection is much weaker, and on the third floor, there is no signal at all. The customer also wants stable Wi-Fi on the balcony, where he often rests, and outside in the barbecue area.

Solution

We decided to use three Wi-Fi access points inside the house and one Wi-Fi access point in a weatherproof enclosure outside. As a result, we have a perfect seamless Wi-Fi network with a high-speed Internet connection inside the house and on the site.

Consider a hotel as an example

A cosy private hotel on the Mediterranean seaside. Seamless high-performance Wi-Fi throughout the hotel and surrounding area, including rooms, restaurant, and reception area.

Problem

The Wi-Fi connection is slow or even not working at all. The signal is having trouble reaching all ends therefore you have to choose a proper place every time you connect. Connection issues occur even if the hotel occupancy rate is low. Network infrastructure is based on consumer-grade Wi-Fi equipment resulting in poor Internet connection and fewer visitors.

Solution

Only professional equipment can effectively handle heavy loads and provide full coverage with high connection speeds. After the wireless site survey, we determined the proper locations for the new equipment and elaborated the optimum system configuration. For convenience, two networks were set up: WiFi-Guest and WiFi-Staff. An app was installed on the administrator's smartphone to control the network and change the password.

Our design process

Wi-Fi coverage predictive inspection

Our qualified engineers are ready to prepare a quotation for you and eager to perform a preliminary simulation using the most advanced Wi-Fi designing software Ekahau Pro. The simulation takes into account the environment, wall thickness, construction materials, and other factors.

Below is an example of the Wi-Fi coverage simulation for a 300 sq.m. apartment. Using predictive inspection, we decided to install five Wi-Fi access points to provide high-speed and seamless Wi-Fi coverage throughout the entire area.

Simulations are performed for 2.4 GHz and 5 GHz bands

How We Implement

Deployment and Fine-Tuning

We believe that wired and Wi-Fi networks are the infrastructure for all your home subsystems. With our experience, we take into account all the nuances for the smooth operation of CCTV, multi-room, and smart home systems, as well as other wired or wireless subsystems. As a result, you get a stable, secure, high-performance, industrial-grade wired and wireless network that can operate 24/7 without failures or malfunctions.